- Home
- ยป
- Our Products
- »
- Packing Products
Packing Products
Ceramic Tape
Ceramic Tape Ropes are woven from yarn consisting of refractory ceramic fibre with approximately 20% organic carrier fibre. Inserted materials are incorporated into the yarn to increase fabric tensile strength. These products have exceptionally low smoke-off characteristics upon heating as compared with standard ceramic fibre textiles
Temp Resistance: 1260 C
Size: Tape is supplied in 10kg rolls of 1”, 2” 3” or 4”
Ceramic Rope
Ceramic Fiber Rope is mainly used for high temperature sealing and packing application. It is light weight, resilient and has a property of high temperature resistance and chemical stability. To further improve mechanical properties the ropes can be reinforced with metallic wire.
Temp Resistance: 1260 ?? C
Size: 3MM, 6MM, 8MM, 10MM, 12MM, 16MM, 19MM & 25MM in square or round shapes. Standard packing of 5kgs
Ceramic Cloth
Ceramic Clothes and Ropes are woven from yarn consisting of refractory ceramic fibre with approximately 20% organic carrier fibre. Inserted materials are incorporated into the yarn to increase fabric tensile strength. These products have exceptionally low smoke-off characteristics upon heating as compared with standard ceramic fibre textiles
Temp Resistance: 1260 ?? C
Size: 3MM Thickness, Width 1 MTR , Length upto 50MTRS
Teflon (PTFE) Ring Gasket
Teflon (PTFE) Envelope Gasket are two types
Teflon (PTFE) Envelope Gasket are two types:
Slit Type : It is available in 0.5 mm to 0.5 mm thick or thickness as per customer requirement.
Milled Type / “U” Type : It is manufactured and available in 0.5 mm flange & gas, as per customer requirement. Envelope gaskets are also available with Asbestos / Non-asbestos & Steel Filler.
Additional Information:
- Item Code: 3
Asbestos PTFE Packing
Asbestos PTFE packing is made of white asbestos fiber cords impregnated with PTFE dispersion. Soft in texture, this material is suitable for sealing pumps for various chemicals. However, packing impregnated with lubricants is recommended for use with reciprocating pumps or for sealing in places where high linear velocity.
Application conditions:
1. Max. working temperature: -75°C ~ 260°C
2. Max. working pressure: 2Mpa (rotary pump)
Max. working pressure: 10Mpa (reciprocating pump)
Max. working pressure: 15Mpa (valve)
3. PH value: 2-12
4. Linear speed: 0 – 10m/s (rotary pump)
Linear speed: 0 – 2m/s (reciprocating pump)
Linear speed: 0 – 2m/s (valve)
5. Cross Section: 1/8″ ~ 3″(3X3-75X75mpa)
6. Density: 1.35 ~ 1.45g/cc
Fibre Packing Sheets
We are authorized stockist for SPITMAAN industries.
We stock a wide range of compressed fibre gasket sheets which can be cut as per your specifications for more details contact us.
Aramid Packaging
Features:
ANTI ABRASIVE PACKING Duplex Plaited Non-Asbestos Synthetic Fibre product which is as strong as steel, as smooth as silk, most flexible and treated with high temperature resisting lubricants, under controlled conditions. Well suited for pumping granular and viscous fluids even under high pressure conditions.
This packing has a high degree of resiliency and consistency of volume and hence avoids frequent gland adjustments. Low thermal expansion characteristics under actual operating conditions reduce mechanical pressure against shaft sleeves to minimize abrasion effect.
Recommended
Temperature | -200°C to 300°C |
Pressure | upto 280 Bar |
PH | 3 -12 |
1. Sizes 3 mm to 5 mm is supplied in spools of 10 mtrs.
2. Size above 5 mm is supplied in Boxes/Kgs.
3. Also can be supplied in accurate cut rings.
Carbon Fiber Packing
Features:
Carbon fiber packing with graphite is woven of strong carbon fiber after softening treatment and impregnation with a mixture latex of fine graphite powder, PTFE dispersion and lubricant. It is chemical resistant, heat conductive and with high strength, so this item is widely used with revolving and reciprocating pumps in which chemical corrosive media and particle grains exist. The successful test result in application of high pressure ammonium and luiquid ammonia pumps proved it’s the best sealing material for high pressure a, high temperature and corrosion.
Application conditions:
1. Max. working temperature:-200°C ~ +650°C (STEAM)
-200°C ~ +565°C (ATMOSPHERE)
2. Max. working pressure:5 Mpa(rotary pump)
Max. working pressure:15Mpa(reciprocating pump)
Max. working pressure:25Mpa(valve)
3. PH value: 0-14
4. Linear speed: 0-20M/S(rotary pump)
Linear speed: 0-2M/S(reciprocating pump)
Linear speed: 0-2M/S(valve)
5. Cross Section: 1/8″ ~ 3″(3X3-75X75mm)
6. Density: 1.35 ~ 1.45g/cc
Regular package: 5 or 10kg/roll
Composite Aramid Fiber Packing
Application conditions:
1. Working temperature: -100°C – +260°C
2. Max. working pressure:5Mpa(rotary pump)
Max. working pressure:10Mpa(reciprocating pump)
Max. working pressure:20Mpa(valve)
3. PH value: 2-12
4. Linear speed: 15M/S(rotary pump)
Linear speed: 2M/S(reciprocating pump)
Linear speed: 2M/S(valve)
5. Cross Section: 1/8″ ~ 3″(3X3-75X75mm)
6. Density: 1.50 ~ 1.65g/cc
Expanded Graphite Packing
Expanded graphite packing is braided from high-grade low sulphur expanded graphite yarn. This item has superior resistance from high temperature and chemical corrosion,as well as other special sealing effects.It’s widely used in steam valves of powder station,,static sealing with high temperature,high pressure and chemical corrosion.
Application conditions:
1. Max. working temperature:- 200°C ~ +650°C (STEAM)
-200 ~ +565 (ATMOSPHERE)
2. Max. working pressure: 25 Mpa
(can only be used in valve and other static sealing condition)
(1)Expanded graphite packing(with carbon fiber,SS wire, inconel wire)pressure:35 Mpa
(2)Expanded graphite packing(with inconel jacketed)pressure:40 Mpa
3. PH value: 0 – 14
4. Cross Section: 1/8″ ~ 3″(3X3-75X75mm)
5. Density: 1.10 ~ 1.35g/cc(with cotton, fiberglass,ss304,inconel)
Density :1.50 ~ 1.60g/cc(with inconel jacketed)
Teflon Universal Rope
Introduction:
Flex-O-Seal is a unique sealing material manufactured from special grade of expanded 100% pure PTFE by transforming the fibrous structure by means of a special process. Though very tough, it is spongy and suited to almost all flanges, covers and narrow cavities. Its special soft and flexible character enables it to be the most ideal seal under pressure without significant cold flow even on irregular, badly damaged or corroded flange surfaces. Once bolted this gasket rarely need to be re-torqued.
Properties: FLEX-O-SEAL recommended temperature-240°C, to 310°C, PH Range 0-14 No deterioration due to stocking for long time. Resistant to high pressure, non-toxic. Not recommended for use against elemental fluorine, alkali metals and strong oxidizing agents.
Application:
FLEX-O-SEAL is safely used in petroleum refining companies even in their offshore operations, corrosive chemical processing, food processing, paper mill, marine installation, for glass lined or fibre glass reinforced vessels and tank lid sealing, manhole covers, vent pipes, heat exchangers, pumps or compressors housing flanges, valves and many more industrial applications where conventional pre-cut gaskets are not readily available or unsuitable.
Sizes: Contact us for details
Spiral Wound Gaskets
Minimum Order Quantity: 10 No
Special Spring like Metal strips are wound with an Asbestos Filler by a special process to assure a leak proof seal. The sealing is done by the Asbestos Filler and the metal strip provides the spring. This combination of metal and soft asbestos Filler piles compresses to its predetermined thickness under bolting pressure and thereby preventing leakage within the limit of its specified pressure and temperature ranges. With the addition of Centering devices, adapt Spiral Wound Gaskets to use on many types of flanges and closures.
Materials: Standard materials are type 304 Stainless steel with white Canadian (Chrysotlie) Asbestos Filler.
Metals | Fillers |
Type 304 Stainless | Compressed Asbestos Jointing Strips |
Type 316 Stainless | P.T.F.E. Sintered Strip |
Aluminium | Asbestos paper |
Copper | White Chrysotile Asbestos |
Monel | Blue African Crocidolite |
Steel, Plain | Grafseal |
Steel, Zinc Coated |
Gasket Thickness Available | |
Normal | Actual |
1/8″ (3.2 mm) | .125″ ± .005″ (3.2 mm) |
3/16″ (4.8mm) | .175″ ± .005″ (4.5 mm) |
How To Order:
When ordering Spiral Wound Gaskets, give the following information:
1. Quantity
2. Gasket shape
3. Inside and outside Dimension of Gaskets
4. Flange width
5. Gasket Thickness
6. Operating Pressure
7. Operating Temperature
PTFE Sheets
We offer a wide range PTFE Molded Sheet / Skived sheets
Standard Size:
Thickness From 1.5 mm to 100 mm / 300 mm2 / 400 mm2/ 450 mm2 / 500 mm2 / 600 mm2 / 900 mm2 / 1000 mm2/ 1200 mm2
Available Grades:
Virgin PTFE
- 15 % Peek PTFE
- 15 To 25 % Glass Filled PTFE
- 25 To 35 % Carbon Filled PTFE
- 15 % Graphite Filled PTFE
Special Grade as per customer specification